OSD Menu
_
Day & Night
1
For cameras with no IR LED Built-in :
- D
→
N Threshold (AGC) : Set when the camera switches from day to night mode by the AGC value.
When the camera detects AGC levels beyond the set threshold, it will switch from color to B/W.
- D
→
N Delay (AGC) : Set a delay for the camera when switching from day to night mode.
- N
→
D Threshold (AGC) : Set when the camera switches from night to day mode by the AGC value.
When the camera detects AGC levels beyond the set threshold, it will switch from B/W to color.
- N
→
D Delay (AGC) : Set a delay for the camera when switching from night to day mode.
For cameras with IR LED Built-in :
- D
→
N Threshold (CDS) : Set when the camera switches from day to night mode.
The lower the value, the camera will require less light (more darkness) to switch to Night Mode.
- D
→
N Delay (CDS) : Set a delay for the camera when switching from day to night mode.
- N
→
D Threshold (CDS) : Set when the camera switches from night to day mode.
The lower the value, the camera will require less light (more darkness) to switch to Night Mode.
- N
→
D Delay (CDS) : Set a delay for the camera when switching from night to day mode.
- EXT LED : AUTO : The LEDs are enabled/disabled by the CDS Sensor on the LED Board.
OFF : The camera’s LEDs are disabled manually.
AUTO
- AUTO : Day/Night switch is based on the CDS levels (IR models) or AGC levels (non-IR models).
- COLOR : The camera always stays in day/color mode.
- B&W : The camera always stays in night/B&W mode.
- EXT : The camera’s Day & Night settings are set according to an external IR LED board.
21
