Quick Start Guide for Aqua Compact Pro V1.00
TEL + 44 1179 554474 www.digitalyacht.co.uk
Please note that the Aqua Compact Pro enclosure is internally connected to the negative supply.
Extreme care
should be taken when routing positive supply cables close to the Aqua Compact Pro
and you should not
secure the Aqua Compact Pro on to a metallic or conductive surface
as this may affect the boat’s grounding.
Always ensure that the Aqua Compact Pro enclosure and any USB and HDMI cables are not connected to the
boat’s ground.
Always power down the Aqua Compact Pro PC before connecting USB, Network or HDMI cables from other
devices.
Try to ensure that all devices connected to the Aqua Compact Pro
PC are powered from the same boat’s DC
supply that is powering the Aqua Compact Pro. This will avoid potentially damaging, differences in ground
voltages.
Do not try to turn on the Aqua Compact Pro PC yet.
Installation Step 5
The Motherboard connections and features of the Aqua Compact Pro PC are as follows;
1. 5
th
Generation Intel Core i3-5010U Processor
2. Two DDR3L SO-DIMM sockets
3. M.2 slot with 128GB Sold State Drive
4. 1 x SATA for 2.5
” SSD or HDD
5. Dual Band Wireless-AC and Bluetooth 4.0
6. Kensignton Lock Support
7. Backpanel DC Power Connectors (8v-19v)
8. Mini Display Port with 7.1 surround sound
9. Intel Gigabit LAN
10. 2x USB 3.0 Ports on backpanel
11. Mini HDMI port with 7.1 surround sound
12. Power Switch and Status LEDs
13. 2x USB 3.0 ports on front panel
14. Intel HD Audio via Headphone/Mic jack
15. Consumer infrared sensor
