If your wireless device has UDP enabled (all units sold since April 2012) or you have enabled this yourself
by following our Tech Note 00030-2012, then you do not need to find out what IP address your wireless
product has been given, simply connect your iPhone/iPad/Laptop/etc. to your wireless network and then
initiate a UDP connection on port 2000.
All wireless NMEA data connections on your wireless network are totally transparent to other users on the
network who might be printing a file, accessing the internet, etc. and all normal networking activity can be
done at the same time as you are receiving NMEA data on the network.
So now you have a single, password protected wireless network on your boat over which your NMEA data
can be transmitted and the same network can be used for internet and other networking activities.
