D-FORCE600VA SLIDING GATE OPERATOR
OFF
N.O. limit switch(magnetic limit)
3
ON
When the 3 and 4 all OFF, the Auto-
close function is disable. When the 3
OFF and the 4 is ON, auto-close time is
near 12 Sec. when the 3 ON and the 4 is
OFF auto-close time is near 24 sec. when
the 3 and the 4 is all in ON position, the
auto-close time is near 36 sec.
OFF
(see Fig.13C)
4
ON
OFF
(see Fig.13D)
NOTE:
(1)
You must follow the operating instruction as above, any
wrong operation is not allowed during setting. If your device
responds to your requested function correctly, you have set the
function successfully, otherwise repeat the above setup
instruction until your device responds to your expected
function.
(2)
If the gate can not be moved, please check whether the
gate is obstructed or the gate is too weight.
Activities Covered in this section
Remote transmitter:
With each press of the button, the gate will
close, stop, open or stop cycle.
(Single-button mode)
Three-button mode external button switch (not supply):
press
‘OPEN’ button, the gate opens. Press ‘STOP’ button, the gate stops.
Press ‘CLOSE’ button, the gate closes.
Single-button mode external button switch / keypad (not supply):
With each press of the button, the gate will close, stop, open or stop
cycle.
Auto-close function:
This feature can be selected to make the gate
stay open for some seconds before it automatically closes. The auto-
20
