Manual
5G IoT Smart Padlock
Page
2
of
11
About This Manual
Copyright 2020 by Digital Keys Pty Ltd.
Level 1, 1 Tonsley Blvd,
Tonsley South Australia, Australia 5042
https://www.digitalkeys.io/
Edition: 20222405
Version: 1.1
Document number:
PADLOCK_2.0.DOCX
This issue replaces all previous issues. All previous issues are invalid. The information in this manual can
be changed without prior notice.
Passing on or copying this document, using and providing information on its contents is prohibited
unless expressly permitted. Infringements shall be subject to compensation claims. All rights
reserved in the case of patent award or listing of a registered design.
The arrangement of information for this document is to the best of our knowledge and belief. Digital Keys
assumes no guarantee for the accuracy or completeness of the contents of this document. In particular,
Digital Keys cannot be made liable for consequential damages which are due to erroneous or incomplete
information. As mistakes can be made despite our best possible efforts, we would be very thankful for any
corrections which you may find necessary.
Safety and warning instructions
•
This manual outlines the commissioning, installation and operation of a 5G IoT Smart padlock
•
This equipment may only be used for the purpose specified by the manufacturer.
•
This manual should be kept accessible.
•
Illegal changes and the use of spare parts as well as accessories that have not been sold or
recommended by the manufacturer of this unit can cause fires, electric shocks and injuries. Such
measures lead to an exclusion of liability, and the manufacturer accepts no responsibility.
•
Repairs may only be carried out by the manufacturer or accredited distributor/re-seller.
•
Basis for the guarantee of the manufacturer is the version of the warranty policy for the unit at the
time of purchase. No liability is accepted for inappropriate, incorrect manual or automatic setting of
the parameters for the device, or its improper use.
•
The distributor/re-seller in conjunction with the lock purchaser (if required), is responsible for
ensuring that the device is assembled and mounted according to the recognised technical
guidelines as well as other valid regulations in the country of use
