Manual
5G IoT Smart Padlock
Page
9
of
11
Time Zones
The 5G IoT smart locks use local internet time, which can be set when the locks are first set-up and
commissioned by our local distributors. Locks can be programmed to work for a minimal 30 minute
timeslot. When the programmed time for the digital keys expires, the unlock icon will disappear from the
digital keys app, and the digital key will show as
‘expired’ in the access management software.
NFC Tokens/cards
The 5G IoT smart locks only work with special Digital Keys NFC cards/tokens. The product will not work
with any NFC cards bought online from third parties, or from non-certified 5G IoT smart lock re-sellers. 2
NFC tokens are provided in every pack. Please contact Digital Keys or your local distributor/re-seller if you
need to buy more keycards/tokens.
Battery replacement
1. Loosen the small screws on each of the four corners on the back of the lock, with provided security
screwdriver.
2. Carefully lift the cover and circuit board up to reveal the battery pack.
3. Remove old batteries and place new batteries correctly into the compartment.
4. Close the cover and screw shut again.
Note: No digital keys are deleted during the battery changeover.
Battery Notifications/monitoring
A live battery status is shown in the access management software (please see section 2 User guide for
more information). Account administrators can set up email notifications for when battery status gets below
10%.
Care and maintenance
The 5G IoT smart padlocks are maintenance-free. At no time may they be oiled or greased with lubricants
containing mineral oil. Cleaning may only be carried out with non-stick, residue-free cleaning and
