2
Introduction
Designed for LCD monitor and other flat panel display applications, the ALR-1400 controller provides easy to use
interface controller for:
TFT (active matrix) LCDs with LVDS interface of 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600,
800x600, 800x480, 640x480, 480x234 resolution;
Computer video signals of SXGA, XGA, SVGA, VGA standard
Support LVDS or TTL interface panel
HOW TO PROCEED
Ensure you have all parts & that they are correct, refer to:
•
Connection diagram (separate document for each panel)
•
Connector reference (in following section)
•
Assembly notes
Check controller switch & jumper settings (errors may damage the panel)
Prepare the PC
Connect the parts
Understand the operation and functions (in following section)
IMPORTANT USAGE NOTE
This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or
injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this
product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
Understand the operation and connectivity requirements of this controller.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
SYSTEM DESIGN
A typical LCD based display system utilising this controller is likely to comprise the following:
Summary:
1.
LCD panel
2.
LCD controller card, ALR-1400
3.
LVDS cable (for connection with LVDS panel)
4.
TTL cable (for connection with TTL panel)
5.
Inverter for CCFT backlight (if not built into LCD)
6.
Inverter cable
7.
Function controls
8.
Function controls cable
9.
Status LED
10. DVI-D input
11. Analog VGA input
12. Power input (12VDC / 24VDC)
13. RS-232 control port
Digital View offers a range of accessories such as listed above, to make up complete display solution.
