User’s Manual
29
Troubleshooting Guide for Splitters
- Please check the following before contacting the Customer Center for service.
Status: When the TV screen does not show anything or is blinking
Check List
Measures
Is the product
connected to the
HDMI Cable
properly?
1) Connect the product to the cable correctly.
2) Replace the cable and connect the new one.
Is the LED for
“POWER, SYNC,
HDCP, INPUT, FE
LED
” on the front
blinking or off?
1) Check if the power adapter is connected properly.
2) Press the “Power” button on the front.
3) Check if the AC power is connected properly.
4) Replace the adapter.
Is the adapter
enclosed with the
product supplied by
DIGITALZONE?
1) Use an adapter supplied by DIGITALZONE only.
Are the video source
equipments
(Generator and Blu-
Ray) turned on?
1) Directly connect the video source equipments
(Generator and Blu-Ray) to the TV to see if they work
normally.
Has the Input number
been selected
properly?
1) Select “Input1” for one video source.
2) If “Input2” is selected, press the “Input2” button on
the front.
Are you using UHD
TV, Full HD TV and
HD TV together?
1) Select F1 (Normal mode) from the EDID Emulation
mode, or select one of resolution from the static mode.
(Refer to the page 30 for Static mode)
※
When additionally connecting or removing a TV to or from a splitter, the TV screen may blink for
a few seconds and then become normal due to the initialization of EDID.
(This is not an error but a normal operation.)
Summary of Contents for S5 HVS-5204
