The taximeter has, in its front side, 5 keys (or buttons)
called:
OP, K1, K2, K3, K4.
The taximeter has three working modes called:
The taximeter’s working modes are selectable by
pressing the
OP
button in the following sequence:
For Hire
Hired Stopped
In any of the above taximeter’s working mode (
FOR
HIRE, HIRED, STOPPED
), the other four buttons
K1
,
K2
,
K3
,
K4
will exploit a different function, as below de-
scribed.
A) Taxi in “For Hire”
When the Taxi is parked or it moves without any pas-
senger on board, the taxi driver selects the For Hire
position by OP. The clock is displayed and the keys will
have the following functions:
For Hire
Hired Stopped
For Hire Chrono Start Chrono Stop
For Hire
Go back from Chrono to Clock
For Hire
Shows calendar Day and Month
For Hire
Shows Year
B) Taxi in “Hired”
Once the taxi starts the trip, the taxi driver selects the Hired
position by OP. The “Taxi” roof sign will turn off and the taxi-
meter starts the fare calculation by distance or time.
Hired
Stopped For Hire
Hired Selects Rate Nr (if inabled)
Hired Insert Extra Nr 1 (If enabled)
Hired Insert Extra Nr 2 (If enabled)
Hired Reset
Extras
C) Taxi in “Stopped”
At the end of the trip, the taxi driver has to select the
Stopped position by
OP
.
The waiting time counting is thus blocked.
Stopped For Hire Stopped
Stopped Insert Special Extras
Stopped Insert Extra Nr 3 (If enabled)
Stopped Insert Extra Nr 4 (If enabled)
Stopped Reset
Extras
STATISTICAL MEMORY:
READ / PRINT / ERASE
The taximeter has, inside, 2 blocks of memory called:
BLOCK 1 --- BLOCK 2
Each one is divided in 45 locations. Each one is enabled to
record and keep the taximeter’s activity.
Block 1
is the Partial Block since the activity information con-
tained in its 45 locations can be read, printed and erased
whenever desired (See speci
fi
c procedure).
This “Partial Function” is very useful and may be utilized for
working shift data’s control and analisys.
Block 2 is the Total or Cumulative Block since the activity
information contained in its 45 locations can only be read
and printed.
HOW TO READ THE INFORMATION
CONTAINED IN BLOCK 1 and 2
1)Select the
For Hire
mode by pressing OP button;
2)Press
K1 + K2
buttons at the same time to enter
“Statistical
Reading”
; (Fig.1)
3)The
secondary
display will now show: (Fig.2)
at its left-side
:
1 - indicating the Memory Block Nr. being read pressing
K3
button
now, to go to Block 2; (Fig.3) pressing
K3
button again, to go back to
Block 1. at its right-side: a number between 1 and 45, indicating the
Location Number. (Fig.2)
4)The
main
display will now show a Nr. which is the information
contained in the correspondent memory location being read and
now indicated at right-side of secondary display;(please see
locations’ list ) (Fig. 2 /3)
5)Press
K1
or
K2
buttons if You wish to decrease or increase
respectively memory location’s Nr. (memory location Nr. is indicated
on right side of secondary display);(Fig. 2)
6)Press
OP
button to go back to
For Hire
mode and to
END
the
Reading Procedure
STATISTICAL MEMORY: PRINT-OUT
1)Select the
For Hire
mode by pressing
OP
button;
2)Press
K1
+
K2
buttons at the same time to enter
“Statistical Reading”; (Fig. 4)
3)Press
K2
buttons till You reach memory location Nr.5
(memory locations Nrs. are shown at right side on secondary
display); (Fig. 5)
4)When You have reached memory location Nr.5, press
K4
button to print out all information contained in memory loca-
tions of both memory blocks. (Fig. 6)
5)Press
OP
button to go back to
For Hire
mode and to
END
procedure.
HOW TO ERASE INFORMATIONS CONTAINED
IN MEMORY LOCATIONS OF BLOCK 1
1)Select the
FOR HIRE
mode by pressing
OP
button;
2)Press
K1
+
K2
buttons at the same time to enter “Statistical
Reading”;(Fig. 7)
3)Press
K2
buttons till You reach memory location Nr.19; (memory
locations Nrs. are shown at right on secondary display);(Fig. 8)
4)When You have reached memory location Nr.19, press
K4
button
to erase all information contained in memory locations of
BLOCK
1
; (when pressing
K4
, if the printer is
ON
all the information
would be printed before being erased);(Fig. 9)
5)Press
OP
button to go back to
FOR HIRE
mode and to
END
procedure.
STATISTICAL MEMORY READING
Memory Location List
1)
Trips total number
idem
2)
Taximeter units total number
idem
3) Total
Kilometers
idem
4)
Total Kilometers in For Hire
idem
5)
Total Kilometers in Hired
idem
6)
Km in for For Hire with passenger on board idem
7)
Km in Over speed
idem
8)
Collected Total (Fare+Tax)
idem
9)
Collected by Credit Card Total
idem/100
10)
Fare Total Amount (excluded Tax)
idem/100
11)
Extras Total Amount
idem/100
12)
Tax Total Amount
idem/100
13)
Run time in Stopped
idem
14)
Run time in Hired and Stopped
idem
15)
Waiting time in Hired
idem
16)
Meter on total time
idem
17)
Total Tariff 1 collection
idem
18)
Total Tariff 2 collection
idem
19)
Total Tariff 3 collection
idem
20)
Total Tariff 4 collection
idem
21)
Total Tariff 5 collection
idem
22)
Total Tariff 6 collection
idem
23)
Total collections from 7th to 64th
idem
24)
Total tariff 1 units
idem
25)
Total tariff 2 units
idem
26)
Total tariff 3 units
idem
27)
Total tariff 4 units
idem
28)
Total tariff 5 units
idem
29)
Total tariff 6 units
idem
30)
Total units from 7th to 64th tariff
idem
31)
Total Kilometers in tariff 1
idem
32)
Total Kilometers in tariff 2
idem
33)
Total Kilometers in tariff 3
idem
34)
Total Kilometers in tariff 4
idem
35)
Total Kilometers in tariff 5
idem
36)
Total Kilometers in tariff 6
idem
37)
Total Km from 7th to 64th
idem
38)
Not used
39)
Not used
40)
Not used
41)
Not used
42)
Not used
43)
Not used
44)
Not used
45) Not
used
ML Block 1 Block 2
FOR HIRE
STOPPED
HIRED
K1
K2
K3
OP
FOR HIRE
ST OPPE D HIRE D
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
2012
FARE £
Night Da y
K4
TAR.
EXTRAS £
1
19
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRED
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
36
FARE £
K4
TAR.
EXTRAS £
1
1
Night Da y
K1
K2
K3
OP
FOR HIRE
ST OPPE D HIRE D
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
2012
FARE £
Night Da y
K4
TAR.
EXTRAS £
1
19
1
1
Push these keys at the same time
Push to reach loc.19
Push to Erase Block 1
Push here to go back to Stopped
K2
K2
2
2
2
2
2
2
2
2
2
2
2
2
K3
K3
K3
K3
K
3
3
3
K1
K1
K1
1
K1
1
K
1
1
1
1
1
1
1
1
K
K
K
K
K
K
K
9
K3
K3
K3
K
K3
K
K
K
K
K
K
K3
K
K
K3
3
K
K3
K
K
K
K
K
K
K
K
K
K4
K1
K1
K2
K3
OP
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
STATIS
K4
FOR HIRE
ST OPPED HIRED
FARE £
Night Day
TAR.
EXTRAS £
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRED
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
36
FARE £
K4
TAR.
EXTRAS £
1
1
11
Night Day
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRED
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
36
FARE £
Night Da y
K4
TAR.
EXTRAS £
2 28
FIG. 1
FIG. 2
FIG. 3
Push these keys at the same time
Changes Memory Block
Decrease Increase
Memory Location Number
Memory
Block
Memory Data
Memory
Location
Number
K2
2
2
2
K3
K
K
K
K
K3
K3
K3
K
K
K3
3
3
K
3
K
K3
3
3
K3
3
3
3
3
K3
3
3
K3
3
3
3
3
3
3
3
3
e s
K3
K
K
K2
K
K
K
K
K
se
K
K
K1
K
K
K
K
K
K
K
+
-
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRE D
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
420
FARE £
Night Da y
K4
TAR.
EXTRAS £
1
5
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRED
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
36
FARE £
K4
TAR.
EXTRAS £
1
1
Night Day
K1
K2
K3
OP
FOR HIRE
ST OPPED HIRE D
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
k= 200 to 100000 i/km
Mod.
420
FARE £
Night Da y
K4
TAR.
EXTRAS £
1
5
1
1
Push these keys at the same time
Push to reach loc.5
Push to Print Out
Push here to go back to Stopped
K2
K2
K2
K2
K2
K2
2
2
K2
K
K2
2
K2
2
2
K2
2
2
2
K
K
K
K2
K4
O
K
K1
K1
K
K
K1
K1
K1
K
K
K
1
K
K
K
K
K
K
K1
K1
K
1
1
K
K1
1
1
FIG.7
FIG.4
FIG.8
FIG.5
FIG.9
FIG.6
