Digitax F1 PLUS, User Manual

The taximeter has, in its front side, 5 keys (or buttons) 

called: 

OP, K1, K2, K3, K4. 

The taximeter has three working modes called:

The taximeter’s   working modes are selectable by 
pressing the 

OP

 button in the following sequence:

For Hire

Hired            Stopped

In any of the above taximeter’s working mode (

FOR HIRE, 

HIRED, STOPPED

),  the other four buttons 

K1

, 

K2

, 

K3

, 

K4

will exploit a different function, as below described.

A) Taxi in “For Hire”

When the Taxi is parked or it moves without any pas-
senger on board, the taxi driver selects the For Hire 
position by OP. The clock is displayed and the keys will 
have the following functions:

For Hire

Hired            Stopped

For Hire         Chrono Start          Chrono Stop

For Hire 

Go back from Chrono to Clock

For Hire 

Shows calendar Day and Month

For Hire 

Shows Year

B) Taxi in “Hired”

Once the taxi starts the trip, the taxi driver selects the Hired 
position by OP. The “Taxi” roof sign will turn off and the taxi-
meter starts the fare calculation by distance or time.

Hired     

        Stopped          For Hire

Hired          Selects Rate Nr (if inabled)
Hired          Insert Extra Nr 1 (If enabled)
Hired          Insert Extra Nr 2 (If enabled)
Hired Reset 

Extras

C) Taxi in “Stopped”

At the end of the trip, the taxi driver has  to select the 
Stopped position by 

OP

.

The waiting time counting  is thus blocked.

Stopped           For Hire            Stopped

Stopped          Insert Special Extras
Stopped          Insert Extra Nr 3 (If enabled)
Stopped          Insert Extra Nr 4 (If enabled)
Stopped Reset 

Extras

FOR HIRE

STOPPED

HIRED