Thank you for purchasing this product. For optimum performance and safety, please read
the instructions carefully and keep the manual for future reference.
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repaire the device or open the enclosure without professional person guidence
to avoid electronic shock.
5. Make sure good ventilation openings to avoid product overheating, causing damage.
6. Shut off power and make sure environment is safe before installation.
7. Do not plug-in/out the network cables and IR cables when it is in use to avoid cables
damage.
8. Make sure the specification matched if using 3rd party DC adapters.
This HDMI powerline extender applies the HDBitT transmission protocol and transmits
audio and video signal over existing power line. It does not require any cabling. Under
the same electric meter, it just needs to connect transmitter and receiver .Power them on
and they can match automatically. Plug and play design gives users very convenient and
portable connection.
1. It use powerline to transmit signal, and can be connected where there is outlet,
eliminating the wiring of network cable or HDMI Cable.
2. Input voltage: AC 100~240V.
3. It can extends 1080P@60Hz signal up to 300M under the condition of fluent electric
power environment.
4. It supports IR pass back.
5. Supports HDMI loop output from TX
6. Fireproof raw material is used to ensure safety and reliability.
7. Easy setup, plug and play.
1. HDMI source device (DVD, PS3, Set top box, PC etc).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
3. AC 100~240V Power input.
IMPORTANT SAFETY NOTICE
INSTALLATION REQUIREMENT
FEATURES
INTRODUCTION
