14
Stereo Operation
For stereo operation connect the guitar to the
Input
of the RP90. Connect one cable to the
RP90’s
Left (Mono)
output, and another cable to the RP90’s
Right
output. Connect one cable
to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set
the pan controls of the mixer channels hard left and right in order to retain stereo separation. If
connecting to a mixer, set the
Amp/Mixer
switch to Mixer. If connecting to two amplifiers, set
the
Amp/Mixer
switch to Amp.
Stereo Amp Setup
Guitar Amp Input/Effect Returns
Outputs
Input
Amp/Mixer
switch set to
Amp.
NOTE:
When using a guitar
amp, it may be best to con-
nect the Output of the RP90
to the effect return of the
amplifier.
Summary of Contents for RP90
Page 1: ...Modeling Guitar Processor Owner s Manual ...
Page 12: ... A GuidedTour of the RP90 Front Panel 1 2 3 4 5 7 8 9 6 ...
Page 18: ...12 ...
Page 47: ......