17
Section Two - Editing Functions
Editing/Creating Presets
The RP90 is designed to make preset editing and creation easy and intuitive. When creating your
own sound, you must first start with an existing preset. Note that the preset you begin with
doesn’t have to be in the memory location you intend to have it reside, since you can store it to
any User preset location during the store procedure.
The easiest way to start is by using the
Tone Library
and
Effects Library
buttons. The
Tone
Library
button gives you access to a variety of pre-programmed amp/distortion tones (see page
38) based on different musical styles. The
Effects Library
button then lets you select from a pal-
ette of effects chains (see page 39), from simple delays to full multi-effect signals with modulation,
delay and reverb. Use the
Effects Level Button
to easily increase or decrease the Chorus/FX,
Delay and Reverb levels if desired. Using these three controls should get you close to a sound you
are after. From there you can then use the
Edit
buttons to select individual Effects, and the
Value
Up/Down
buttons to adjust their settings.
To edit and create a custom preset:
Use the
Footswitches
to select the preset you wish to edit. If you are trying to find some-
thing different from the existing presets, begin by using the
Tone Library
,
Effects Library
,
Effects Level
and
Value Up/Down
buttons to get close to a sound you want.
Once you have a sound close to what you are after, begin editing the Effects by pressing the
Edit Up/Down
buttons and selecting the Effect you want to adjust.
To turn an Effect on, select it with the
Edit Up/Down
buttons. Each Effect has multiple set-
tings to select from. Use the
Value Up/Down
buttons to change the values for the selected
Effect To turn an Effect off, press and hold the
Value Down
button until
Of
appears in the
Display. (For EQs,
b5
,
d5
, and
t5
are the settings with no boost or cut.)
1.
2.
3.
Summary of Contents for RP90
Page 1: ...Modeling Guitar Processor Owner s Manual ...
Page 12: ... A GuidedTour of the RP90 Front Panel 1 2 3 4 5 7 8 9 6 ...
Page 18: ...12 ...
Page 47: ......