A Volkswagen Group Company
FrameGrabber 4 PCIe Card - Windows Driver installation guide
– v 1.0 – 02.02.2021
3/15
1. Introduction
This document describe steps for installation of Windows Driver intended for following hardware:
DQ FG4 PCIe Card
These versions of MS Windows are currently supported:
MS Windows 10
– 64bit
MS Windows 10
– 32bit
MS Windows 8
– 64bit *
MS Windows 8
– 32bit *
MS Windows 7
– 64bit *
MS Windows 7
– 32bit *
(*) Please note that root-signing certificate expired and no new certificate would be available. Driver
could be installed and works. During installation on affected systems user must confirm that a driver is
not signed.
Windows driver is available for download on Digiteq Automotive FrameGrabber 4 Product Download
Site:
https://fg4.digiteqautomotive.com/windriver
Installation steps are divided into two sections:
Standard Installation
– in case the “Multimedia Video Card” is detected in Windows Device
Manager
Troubleshooting Installation
– in case the “Multimedia Video Card” is not detected in Windows
Device Manager
NOTE 1: In case of multiple DQ FG4 PCIe cards are present in system, Windows Device Manager may
show multiple instances of
“DQ FG4 PCIe Card” in the “Sound, video and game controllers” section.
NOTE 2: In case you
follow instructions described in “
Troubleshooting Installation
”, remove any
redundant instances (if present) of
“DQ FG4 PCIe Card” which may be labeled by yellow warning
symbol.
