Digitone proseries blocker, Operation Manual

from ringing and receiving Caller ID.  If the caller is an Invited caller then the Caller ID information will 

display on the next ring to the phones connected to the TEL phone port thereafter.  This stops unwanted 

Caller ID information from being received by the phones connected to the DPB

TEL phone port. If you 

want to hear the first ring, enter programming: press and hold the 

Program Button

 for 3 seconds until 

you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter 

71

.  

This code will allow all rings and all Caller ID information to be received by phones connected to the TEL 

phone port.  To return to the (default) First Ring Suppression mode, enter programming: when the 

prompt for “Enter Code” displays enter 

70

, display shows function. 

Programming Numbers - Invited, VIP and Blocked

Inviting Individual Callers Code 50 

Note that all callers with valid phone numbers are invited by default, so you don’t need to invite callers 

one at a time.  However, if you are using the Global Block Method, then this feature is useful for inviting 

callers that would otherwise be blocked.  You can store in individual callers as they call in like family, 

friends and business associates by using the 

Invite Button

 on the front panel or use Program Code 50.  

To enable this feature, press and hold the 

Program Button

 for 3 seconds until you see “Program 

Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter 

50

 to store a full number 

followed by the 

*

 key.  Example for an Invited number enter: 50, 894 555 1212 *.   Store up to 

50 

numbers or area codes

. 

Inviting Area Codes  

You can program in specific Invited area codes using the 

Program Button

 on the front panel.  To 

enable this feature, press and hold the Program Button for 3 seconds until you see “Program Mode”, then 
“Pick Up Phone”, when the prompt for “Enter Code” displays enter 

50

 to store an area code followed by 

the # key 7 times, then the 

*

 key.   The 

#

 key is used as a wildcard replacement for any number. 

Example for Invited area codes enter: 50, 894 ### #### *, display shows function.  

Inviting VIP Callers Code 60 

You can program in specific VIP callers like family, friends and business associates, who can ring through 

at any time by using the Program Button on the front panel.  To enable this feature, press and hold the 

Program Button

 for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt 

for “Enter Code” displays enter 

60

 to store a full number followed by the 

*

 key.    Example for a VIP 

number enter: 60, 894 555 1212 * or for a VIP area code enter: 60, 894 ### #### *, display shows 

function.  Store up to 

50 numbers or area codes

. 

Inviting Callers within a Blocked Area Code Code 52 

Invited callers within a blocked area code (up to 10) can only be added using programming 

Code 52

, 

and not by using the Invite button.  To Invite a number within a blocked area code, press and hold the 

Program Button

 for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt 

for “Enter Code” displays enter 

52

 to store a 

full 10 digit number

 followed by the 

*

 key.  Example: 52, 

894 555 1212 *, display shows function.  Store up to 

10 numbers

 within one or more area codes. 

Blocking Known Unwanted Callers Code 40 

Known unwanted callers (Non Auto Del Nbrs)

 are those you enter through programming Code 40 

and won’t be accidentally erased when clearing the memory of blocked numbers. To Block known 

unwanted individual callers, press and hold the 

Program Button

 for 3 seconds until you see “Program 

Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter 

40

 (to store a number of 

your Blocked caller) followed by the 10 digit number, then the 

*

 key.  Example for a Blocked number 

enter: 40, 894 555 1212 *, display shows function.  Store up to 

1,000 unwanted caller numbers

. 

Blocking Known Unwanted Area Codes 

To Block specific unwanted area codes, press and hold the 

Program Button

 for 3 seconds until you see 

“Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays, enter 

40

 to store an 

area code followed by the 

*

 key.  Ex. for a Blocked area code enter: 40, 894*. Area codes are displayed 

as just the area code.  Store up to 

1,000 unwanted area codes

. 

6