Editing Drill Data
54
DigiTrak
®
F5
®
SST
®
Operator’s Manual
Confidence Points
Confidence data points can only be entered if there is terrain data and there is a drill path (drill data
points). Confidence data points include the horizontal distance from the drill rig, the relative depth, and
the planned course deviation (right/left). A confidence point can be inserted, edited, imported, or removed
from the drill plan table as described below. Only one confidence point can be entered per drill data point
(or per drill rod).
To insert a new confidence point:
1. Place your mouse on the chart area where you would like the confidence point to display, and
then hold down the control and shift buttons and click the mouse (control-shift-click). The Steering
Confidence Point dialog box will display.
Steering Confidence Point Dialog Box
2. Enter the requested information and click on OK. The confidence point will appear on the graph
as a highlighted point and display in the confidence points data table. The confidence point data
will override the calculated drill path and force it to pass through the measured point.
To edit an existing confidence point:
1. Right-click on the confidence point in the data table and select Edit or double-click on the
confidence point in the graph to open the Steering Confidence Point dialog box.
2. Enter the requested information and click on OK.
To delete a confidence point:
1. Select the confidence point to be deleted (click on the confidence point in the data table or on the
confidence point in the graph).
2. Right-click on the highlighted point and select Delete. The confidence point will be deleted from
the graph and data table. The graph will display the original calculated value for depth.
Depth value is
actual depth
measured with
respect to terrain
Distance left (L) or
right (R) of the
entry point to
where confidence
point is measured
X Distance is the
lateral distance from
the entry point to
where the confidence
point is measured
