db CodeLock
Version 1.3
Digitus Biometrics, Inc. 2017
Page 8 of 10
Connect the lock to 3
rd
-party Access Panel
Orange/White –
GND
, Ground
Orange –
LOCK CTRL
. Requires a 12V (24V if a 24V version of the db CodeLock was purchased) control line to unlock the
handle
Green/White –
RED LED
. Connect to the Red LED output on the 3
rd
-party panel
Blue –
V+,
Requires a 12VDC Supply
Blue/White –
LATCH POS
(used to indicate if the lock is open or closed) – Will be pulled to Ground (GND) if the handle is
closed. Will be open circuit if the handle is open.
See diagram below
Green –
GREEN LED
. Connect to the Green LED output on the 3
rd
-party panel
Brown/White – Wiegand
DATA 1
Brown – Wiegand
DATA 0