the “Abt” will light without flash.
④
Exit from the setting interface. Press and hold function
setting key
for more than half a second (less than
2 seconds), exit from the setting interface and return to
main interface.
If used, the corresponding word is “ON”. Therefore,
checkperiodically the battery connections.
Warning Code
Display mode
setting (7)
①
Enter the setting interface. Press and hold the function
setting key
for more than 2 seconds, then come to
setting interface, Press and hold the inquiring key
for
more than half a second(less than 2 seconds), select the
function setting, choose Warning Code Display setting
interface, at the moment, the letters “wc” will flash
②
Enter the “wc” setting interface. Press and hold the
function setting key
for more than half a second(less
than 2 seconds), then come to setting interface of “wc”, at
this time, the letters “Abt” will light for a long time. The
“ON”(or OFF) below the Abt will flash. Press and hold the
inquiring key
for more than half a second (less than 2
seconds) to determine whether the “wc” function is used or
not. If used, the corresponding word is “ON”, if not, the
word is “OFF”. It can be determined by yourself.
③
Confirm the “wc” selecting interface. After selecting ON or
OFF, press and hold the function setting key
for more
than half a second (less than 2 seconds). Now, the “wc”
setting function is completed and the “ON” or “OFF” below
the “wc” will light without flash.
④
Exit from the setting interface. Press and hold function
setting key
for more than half a second (less than
2 seconds), exit from the setting interface and return to
main interface.
If used, the corresponding word is “ON”. 2~5 seconds cycle
Warning Code, please refer to Warning Code information Table
in Table 24.
