Replacing Batteries
NOTE
DO NOT DISCONNECT the batteries while the UPS is in Battery mode.
If you prefer to remove input power to change the batteries, see “UPS Turn on and Turn off”.
WARNING
●
Servicing should be performed by qualified service personnel knowledgeable of batteries and required
precautions. Keep unauthorized personnel away from batteries.
●
Batteries can present a risk of electrical shock or bum from high short circuit current. Observe the following
precautions: 1) Remove watches, rings, or other metal objects; 2) Use tools with insulated handles; 3) Do not
lay tools or metal parts on top of batteries; 4) Wear rubber gloves and boots.
●
When replacing batteries, replace with the same type and number of batteries or battery packs. Contact your
service representative to order new batteries.
●
Proper disposal of batteries is required. Refer to your local codes for disposal requirements.
●
Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
Replacing OnLineUPS
If the battery faults, the following steps are provided for modular unit to replace the new battery pack
1.
Remove the front cover of the battery box.
2.
Remove the connection cables between battery box and UPS. Release the screw of the baffle of the
battery pack as the Fig.21 shows, and then remove the baffle from the left or right.
