5.
Repeat Steps 3 and 4 for the other rail assembly.
6.
Tighten the four butterfly nuts in the middle of each rail assembly.
7.
If installing optional cabinets, repeat Step 1 through Step 6 for each rail kit.
8.
Place the UPS on a flat, stable surface with the front of the cabinet facing to you.
9.
Align the mounting brackets with the screw holes on each side of the UPS and fix with the supplied M4×8
flat-head screws(see FIG.4)
FIG. 4 Installing the Mounting Brackets
10.
If installing optional cabinets, repeat Step 8 and 9 for each cabinet.
11.
Slide the UPS and any other optional cabinets into the rack.
12.
Secure the front of the UPS to the rack using one M5×12 pan-head screws and one M5 cage nuts on each
side(see FIG.5).Install the bottom screw on each side through the bottom hole of mounting bracket and the
bottom hole of the rail.
13.
Repeat for any optional cabinets.
FIG. 5 Securing the Front of the Cabinet
14.
Continue to the following section, “Rackmount Wiring Installation.
M4X8 Flat-Head
Screws(2places)
Mounting
Bracket
Mounting
Bracket
M4X8 Flat-Head
Screws(2places)
M5X12 Pan-Head
Screws(2places)
M5 Float
Nuts(2places)
