12
1.6 Front Panel Led Indicators
Please check your front panel led indicators. Make sure they work properly. If they failed, follow
the troubleshooting state below.
A. Power (LED color: GREEN)
On
: System is ready.
Off
: There is no power. Please check your power adapter if connected firmly.
Flashing: Firmware upgrades failed.
B. Status (LED color: GREEN)
On
: DN-11007-N is working properly.
Off
: System is rebooting or down. Please wait for a moment. If it still cannot work,
re-plug the adapter, or contact with your product provider.
C. LAN (LED color: GREEN)
On
: Connector (computer/ switch/ hub) is plugged in.
Off
: LAN port can
’
t work. Please check the LAN cable whether it is plugged firmly, or try
to connect another port for testing.
Flashing: Connector is transmitting/ receiving data.
D. WAN (LED color: GREEN)
On
: XDSL or Cable Modem is connected.
Off
: Your WAN port can' work. Please check the networking cable whether it is
connected to your DN-11007-N properly, or check your ISP.
Flashing: Modem is sending/ receiving data.
E. RESET Button
To restore the factory default values.
One press for 5 seconds to reset for cleaning the former values.
Notice: The actions should be done under the power-on condition