96
learn these DNS addresses in one of the following ways.
Statically:
If your ISP provides you DNS server addresses, you can assign them to each PC
by modifying the PCs IP properties.
Dynamically from DHCP pool:
You can configure the DHCP Server of DN-11007-N and create an address pool
with the specified DNS addresses distributed to the PCs.
In either case, you can specify the actual addresses of the ISPs DNS servers (on
the PC or in the DHCP pool), or you can specify the IP address of the LAN port on
DN-11007-N (e.g., 192.168.1.1). When you specify the LAN port IP address, the
device performs DNS relay.
14. Q: Why does the throughput seem slow?
A: To achieve maximum throughput, verify that your cable doesn
’
t exceed 100 meter. If
you have to do so, we advise you to purchase a bridge to place it in the middle of
the rout in order to keep the quality of transmitting signal. Out of this condition you
would better test something else.
l
Verify network traffic does not exceed 37% of bandwidth.
l
Check to see that the network does not exceed 10 broadcast messages per
second.
l
Verify network topology and configuration.
15. Q: How do I upgrade the firmware of DN-11007-N?
A: Periodically, a new Flash Code is available for DN-11007-N on your product
provider website. Ideally, you should update DN-11007-N Router
’
s Flash Code
using
“
Firmware Upgrade
”
on the
“
System Setup
”
menu of DN-11007-N Settings.
16. Q: Printer is beginning printing, but it prints slowly and with unidentified words or codes.
How could it happen?
A: Your printer
’
s driver is lost or incompatible with your router. Please setup the
printer
’
s driver again. If you don
’
t have the appropriate driver or want to get a
compatible one, please contact with your printer supplier.