23
4.7.2 Time
Set daylight saving time and the current time, and click “Save” to confirm.
Function
Description
Time Configuration
Date
Set the current date.
Time
Set the current time.
Daylight Saving Time Configuration
Daylight Saving
Time
Specify whether to use daylight saving time (Enable / Disable).
If this function is enabled, set the time period (Start Time / End
Time), and adjust the daylight saving time in hours (Adjust Time).
4.7.3 Device
When the connected camera is a PTZ camera, go to this menu to configure the PTZ
camera for the PTZ operation to work normally.
a) Select the device to “PTZ”.
b) Set the ID to the value the same as the one set in the PTZ camera.
Note: For details, please refer to the user manual of the PTZ camera.
c) Select the protocol to “NORMAL” if the connected camera is AVTECH camera. If not,
select “P-D” (Pelco-D) or “P-P” (Pelco-P) based on the camera you connected.
d) Set the baud rate to the value the same as the one set in the PTZ camera.
Note: For details, please refer to the user manual of the PTZ camera.
