3
WARNING
To reduce the risk of fire or electric shock:
•
Install or service the EBP in a temperature and humidity
controlled, indoor environment, free of conductive
contaminants.
•
Ambient temperature must not exceed 40°C (104°F).
•
Do not operate near water or excessive humidity
(90% maximum).
•
Over current protection and disconnect switch must be
provided by others.
•
Install the EBP so that all wiring is inaccessible to users.
•
The maximum number of EBP(s) per UPS is four.
•
Failure to follow these instructions may result in death
or serious injury
Technical Notice
If the EBP requires any type of transportation, consult with the transport
company and take the recommended precautions. Always disconnect batteries
prior to transportation.
If the EBP must be stored, protect it from excessive humidity and heat.
The EBP should be mounted in an environment where the temperature is within
the required specs. Temperature is a major factor in determining battery life and
capacity. In a normal installation, the battery temperature is maintained
between 15°C and 25°C. Keep batteries away from heat sources.
Typical battery performance data are quoted for an operating temperature
between 20°C and 25°C. Operating it above this range will reduce the battery life
while operation below this range will reduce the battery capacity.
An unused battery should be recharged every 6 months. Temporarily connect
the EBP to AC supply and activate it for the time required for recharging the
batteries
