DN-7039-A
108M Wireless Router User Guide
select
Automatic
,
WPA –PSK
or
WPA2-PSK
as authentication options.
•
When you select
WPA/WPA2
as an authentication type you can select
Automatic
,,
WPA
or
WPA2
as authentication options.
WEP Key Format -
You can select
ASCII
or
Hexadecimal
format. ASCII Code
Format stands for any combination of keyboard characters in a specified length.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F)
in a specified length.
WEP Key settings -
Select which of the four keys will be used and enter the
matching WEP key information for your network in the selected key radio button.
These values must be identical on all wireless stations in your network.
Key Type -
You can select the WEP key length (
64-bit
, or
128-bit,
or
152-bit
) for
encryption. "Disabled" means the WEP key entry is invalid.
•
For
64-bit
encryption
-
You can enter 10 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.
•
For
128-bit
encryption
-
You can enter 26 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.
•
For
152-bit
encryption
-
You can enter 32 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
Encryption -
When you select
WPA-PSK/WPA2-PSK
or
WPA/WPA2
for
Authentication Type
you can select either
Automatic, TKIP
or
AES
as
Encryptions.
Figure 5-10a: WPA-PSK/WPA2-PSK
WPA-PSK/WPA2-PSK Passphrase -
You can enter a WPA or WPA2 passphrase
between 8 and 63 characters long.
Group Key Update Period
-
Specify the group key update interval in seconds. The
value can be either 0 seconds or from 30 seconds and up, 1-29 seconds are not
usable figures. Enter 0 to disable the update.
Figure 5-10b: WPA/WPA2
Radius Server IP
-
Enter the IP address of the Radius Server
-
23
-
Summary of Contents for DN-7039-A
Page 1: ...User s Manual ...
