background image

DN-7039-A 

 108M Wireless Router User Guide 

 

To assign a computer or server to be a DMZ server:   
1. Click 

the 

Enable

 radio button 

2.  Enter the local host IP Address in the 

DMZ Host IP Address

 field 

3. Click 

the 

Save

 button. 

Note

: After you set the DMZ host, the firewall related to the host will not work. 

5.7.4 UPnP 

The Universal Plug and Play (UPnP) feature allows the devices, such as Internet 
computers, to access the local host resources or devices as needed. UPnP devices can 
be automatically discovered by the UPnP service application on the LAN. You can 
configure UPnP on this page that shown in figure 5-22: 

 

Figure 5-22: UPnP Settings 

 

Enable UPnP - 

UPnP can be enabled or disabled by clicking the 

Enable

 or 

Disable

 button. As allowing this may present a risk to security, this feature is 

disabled by default.   

 

Current UPnP Settings Table - 

this table displays the current UPnP information.

 

• 

App Description

 – The description provided by the application in the UPnP 

request 

• 

External Port

 

-

 External port, which the router opened for the application. 

• 

Protocol

 

Which type of protocol is opened. 

• 

Internal Port

 

Internal port, which the router opened for local host. 

• 

IP Address

 

-

 The UPnP device that is currently accessing the router. 

• 

Status -

 Either Enabled or Disabled, “Enabled” means that port is still active, 

otherwise, the port is inactive. 

Click 

Refresh

 to update the Current UPnP Settings List.   

 - 

34

 - 

Summary of Contents for DN-7039-A






































































Reviews: