3.2 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please
connect one end of the twisted pair to RJ-45 jack of your computer, the other end will
be connected to any RJ-45 port of the Switch, the distance between Switch and
computer is around 100 meters. Once the connection is OK and the devices are
power on normally, the
Link/ACT status indicator lights corresponding ports of the
Switch.
Specification
Model DN-80110
Chipset RRTL8218
Standards
IEEE 802.3, IEEE 802.3u, IEEE802.3ab,
IEEE802.3x, IEEE802.3az
Network Media (Cable)
10Base-T: UTP category 3, 4, 5 cable (maximum
100m)
EIA/TIA-568 100Ù STP (maximum 100m)
100Base-Tx: UTP category 5, 5e cable (maximum
100m) EIA/TIA-568 100Ù STP (maximum 100m)
1000Base-T: UTP category 5e, 6 cable (maximum
100m)
Number of Ports
24 x 10/100/1000Mbps Auto-Negotiation ports
LED
indicators
Link/Act/speed Link/Act:
Green, 1000M: Green, SFP: Green
Other Power:
Green
Transfer Method
Store-and-Forward
Switching Capacity
52G
MAC Address Learning
Automatically learning, automatically Update 16K
Table
Frame Filtering and Forward
Rate
10Mbps: 14880pps,
100Mbps:148800pps,
1000Mbps: 1488000pps
Dimensions (W × D × H)
440x205x44mm (19” metal case)
Environment
Operating Temperature: 0
℃
- 40
℃
Storage Temperature: -40
℃
- 70
℃
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing
Power Supply
AC 100V~240V 50/60HZ (Internal Power supply)
Power consumption
Max 20(watts)
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
