INSTALLATION
1. When you unpack this product package, please check the devices with packing list.
2. Install the converter chassis in a standard 483mm (19”) cabinet and fix it.
3. Unscrew two screws from the side next to the RJ45 port of the media converter. Then
use these two screws to fix the carrier given with this option onto the side of media
converter, leaving the bigger side of the screws ahead. Then insert the converter to the
chassis, make sure the power plug of chassis is inserted in the power port of media
converter. When the converter is fully and firmly fit the chassis, fasten the screws on
the carrier. Follow the above steps, install all necessary converters in the chassis, then
block up any slots not for use temporarily.
4. Insert the RJ45 twisted pair to the electrical port of converter, and insert the fiber to the
fiber port of the converter. Then connect the supplied AC to DC power adapter to the
receptacle at the back of the chassis, attach the plug into a standard AC outlet with a
voltage range from 100 to 260 Vac or a DC outlet with a voltage of 48 Vac. Then turn
the power switch on, the POWER LED Lamps in the chassis will on and at green color.
For 14 slots media converter chassis, the POWER LED Lamp is in front side. Then the
fans began to work, that shows the power supply of the chassis is normal and stable.
The LED Indicator Lamps of converters installed in chassis should indicate valid
network connections and working status. Then the chassis began to work stably.
5. If the chassis is with dual power supply, please turn on both two power supply, and they
will work together. This will extends the life cycle of the power supply, and can make
sure the chassis work normally in case one of them broken down.
FAULT AND MAINTENANCE
1. Finding out the problems.
When the electrical current becomes dangerous, the POWER LED Lamps of chassis
will become red with alarm at the same time. When the problems have been cleared,
the LED Lamps will back to normal.
If the fuse has blown, or the power supply has broken down, the POWER LED Lamps
will be off, and the fans will not work. (The fuse is under the plug, you can pull it out for
checking or changing when necessary.)
When the fans of chassis broken down, the POWER LED Lamps will be normal but the
fans will not work. If this happens, the power supply must be changed for new ones,
and we will do this for users, you should not do it by yourself, or you may break up the
option s.
