If the power supply of chassis is normal, but the LED Lamps of converters are off, there
might be any problems with the connection between the plug board of chassis and the
power supply, you should stop the electrical current and pull out the power adapter for
checking and reinserting.
2. Changing the power supply for new ones
When one of the dual power supply broke down, the chassis can work normally. You
should pull out the broken one .Then pull out the plug from it, and change it for another
on. connect the plug again. When this is done, the chassis and converters will keep
working.
SPECIFICATIONS
Number of slots:
14
Media converters adapted: 10/100M or 1000M or 10/100/1000M stand-alone
media converters
Power in:
AC 100 V~260 V; OR DC 48V
Power out:
DC 5V, 12A
Diameter of DC plug:
2.5/5.5 mm
Ripple:
≤
50 Mv
Noise:
≤
50 Mv
Protection of power supply: circuit-breaker when overvoltage; circuit-breaker when
overflow; circuit-breaker when short circuit
Operating Temperature:
0°C ~50°C
Storage Temperature:
-20°C ~85°C
Humidity:
5%~95%
Dimensions:
L485, W231, H90 mm; 483mm (19 inches) 2U
