Configure IGMP snooping.
1.1) set igmp enable
This command enables igmp snooping.
Format
set igmp enable
Mode
Global Config
1.2) set igmp disable
This command disables IGMP snooping.
Format
set igmp disable
Mode
Global Config
1.3) set igmp last-memberquery
This command specifies last member query interval.
Format
set igmp last-memberquery <1-200>
Mode
Global Config
1.4) set igmp last-membercount
This command specifies last member count.
Format
set igmp last-membercount <1-20>
Mode
Global Config
1.5) set igmp query-interval
This command specifies igmp query interval<secs>.
Format
set igmp query-interval <10-600>
Mode
Global Config
1.6) set igmp query-resinterval
This command specifies igmp query response interval<secs>.
Format
set igmp query-resinterval <0-200>
Mode
Global Config
1.7) set igmp robustness
This command specifies robustness variable.
Format
set igmp robustness <1-20>
Mode
Global Config
1.8) set igmp router-port
This command specifies igmp router port.
Format
set igmp router-port ports <
port list
>
Mode
Global Config
e.g. Switch(config)# set igmp router-port ports 1-10
2) set igmp-querier
This command configures igmp querier.
Format
set igmp-querier {enable | disable}
Mode
Global Config
3) set igmp-proxy
This command configures igmp proxy.
Format
set igmp-proxy {enable | disable}
Mode
Global Config
4) set static-mcast
Configure static multicast.
4.1) set static-mcast name <WORD> add
This command create a multicast group.
Format
set static-mcast name <
WORD
> add vid <
vlan-ID
> mac <
mac-
addr
>member port <
port list
>
Mode
Global Config
4.2) set static-mcast name <WORD>delete
This command delete a static multicast group.
Layer 2/2+ Management Switch Series
31
