11
4.2.
Client Utilities Installation
The Client Installation Program is a wizard driven procedure which will
perform the following tasks:
z
Install client utilities and drivers into your PC.
z
Automatically add all Network Ports to your PC.
The network port driver supports network protocol auto-detection. It will
automatically select an available network protocol (TCP/IP, IPX or NetBEUI) of
the client computer to connect to the print server.
Since both the print server side and client side support multi-protocols, the
configuration process of the client side is fully automatic.
After the installation, perform the standard “Add Printer” procedure and
choose the print server’s “Network Port” in the “Available Ports” list. You can
test printing from the PC to the print server as your local printer.
The Client Installation can be performed on Windows
98SE/Me/NT/2000/XP/2003/Vista with the same user interface. Before
installation, please confirm that your PC has already connected to the network
and installed at least one network protocol. Note that the following steps are
running in Windows XP, for other Operation Systems the procedures are
similar.
1. Insert the CD shipped along with the print server into your CD-ROM
drive. The Autorun.exe program should be executed automatically. If not,
run Autorun.exe manually from CD-ROM drive’s root directory.
