-20-
7.1.7. Function Control Menu
Functions details will be described in later sections.
List of control functions:
F1: Set
up
: basic set up menu
F2: Scan
: autoscan function
F3: Lock
: setup lock/unlock, only available when
F5 Security
is enabled.
F4: Rename
: rename selected channel name.
F5: Security
: security function and user authority settings
F6: Lock Port
: PC port lock function (for administrator only)
7.2. Channel selection in OSD
7.2.1. Channel select to computer
Use
the
<UP>
and
<DOWN>
arrow keys to highlight a computer and then
<ENTER>
to select it and leave OSD menu. A banner with the channel
name will be shown on left-upper corner of the screen.
┬
────┬──────
│
└
Channel Name
└────────────
Channel Number
Fig. 17: Channel Banner (Single Layer)
7.2.2. Channel select to cascade port
A plus mark (
+
) showing in the left of channel name indicates that the port
is under cascade channing. Pressing
<ENTER>
in this channel will enter
one level down, and the screen pops up the listing of the computers of the
slave KVM.
┬
┬
┬
────┬──────
│
│
│
└
Channel
Name
│
│
└───────
Channel Number
│
└──────────
2
nd
Layer Channel Number
└──────────────
1
st
Layer Channel Number
Fig. 18: Channel Banner (Cascade Layer)
7.2.3. Return from cascade port
After entering cascade port, press
<R>
will return to upper layer OSD menu.
s
s
