-93-
The following steps are necessary to create and install a SSL certificate
for the IP-KVM:
• Create a SSL Certificate Signing Request using the panel shown in
Figure. You need to fill out a number of fields that are explained below.
Once this is done, click on the button “Create” which will initiate the
Certificate Signing Request generation. The CSR can be downloaded to
your administration machine with the “Download CSR” button.
• Send the saved CSR string to a CA for certification. You will get the
new certificate from the CA after a more or less complicated traditional
authentication process (depending on the CA).
• Upload the certificate to the IP-KVM using the “Upload” button as shown
in Figure below.
Figure 70: SSL Certificate Upload
Figure 71: CSR string
