5
Jumper Settings
J1-J4: Enable CON1 or CON3 (Default: CON1)
J5-J8: Enable CON2 or CON4 (Default: CON2)
JP
Description
Default
J1-J4
1-2 close
Enable SATA CON1
1-2 close
2-3 close
Enable SATA CON3
J5-J8
1-2 close
Enable SATA CON2
1-2 close
2-3 close
Enable SATA CON4
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the bard, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down firmly.
5.
Attach your internal or external devices to the PCIe SATA II 300 +
PATA Raid Card.
6.
Replace the slot bracket’s holding screw to secure the card.
7.
Replace the computer cover and reconnect the power cord.
