Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector
with the selected PCIe slot on the motherboard.
Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows
®
XP/Vista/Win7/8 (32/64 bit)
1. Please insert the CD driver bound with USB 3.0 2-Port PCI
Express Add-On Card into your CD-ROM Drive.
2. At the Windows desktop, click
Start
,
Run
.
3. Type
D:\RENESAS NEC uPD720200F1\Setup.exe
, click
OK
.
(Change D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.
To Verify Driver Installation
Click on the
“Device Manager”
tab in System Properties, which you
access from the Windows Control Panel. You should see a “
NEC
Electronics USB 3.0 Host Controller
” and a “
NEC Electronics USB
3.0 Root Hub
” under the “
Universal Serial Bus controllers
” item.
