6
No. Name
Function description
1
Power LED
Red LED indicates that the transmitter is
powered on
2
SERVICE port
Firmware update port
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it
means that either transmitter or receiver is
powered on by 24V/1A power adapter, the other
one doesn’t need power supply
4
HDBT OUT
RJ45 connector for connecting the HDBT
IN port of receiver with a CAT 5e/6 cable
5
Connection
Signal
Indicator
lamp
•
Illuminating: Transmitter and Receiver
are in good connection status
•
Flashing: Transmitter and Receiver are
in poor connection status
•
Dark: Transmitter and Receiver are not
connected
6
Data Signal
Indicator
lamp
•
Illuminating: HDMI signal with HDCP
•
Flashing: HDMI signal without HDCP
•
Dark: No HDMI signal
7
HDMI OUT
HDMI loop output for display
8
HDMI IN
HDMI source input
9
IR IN
IR input port for receiving the signal of IR
remote
10
IR OUT
IR output port for control of source
device. This IR output signal is from the IR
IN port of receiver
11
RS-232
3-pin Phoenix connector for RS-232
command transmission.
