Digitus Firewire 800 User Manual Download

Page: 4 / 5

Page 4

To install the card, carefully align the card’s bus connector

with the selected PCIe slot on the motherboard. Push the

board down firmly.

Connect the system power source to the board’s power

connector.

Replace the slot bracket’s holding screw to secure the card.

Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with

driver installation.

Important:

If your system doesn’t boot to Windows properly with

our card installed, check with your system’s manufacturer for the

latest system firmware update.

For Windows® 7 / Vista / Server 2003 SP1 or above /
XP / 2000

Note: Server 2003 Server Pack 1 or above is required to

install the FireWire 800 Card 3 Ports successfully.

Summary of Contents for Firewire 800

Page 1: ...FIREWIRE 800 400 INTERFACE 3 PORT PCI EXPRESS ADD ON CARD User Manual DS 30203 1 All brand names and trademarks are properties of their Respective owners ...

Page 3: ...CIe FireWire 800 Card 3 Ports 1 x User s Manual Board Layout Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCIe slot ...

Page 5: ...FireWire 800 Card 3 Ports To Verify Windows Installation Right click My Computer then click Manage click Device Manager The Device Manager window opens Scroll to the IEEE 1394 Bus host controllers icon and click on the plus symbol the Texas Instruments OHCI Compliant IEEE 1394 Host Controller should be displayed ...