40
interface already configured on the router, which
conserves network and address space. Check it if you
want to assign the WAN IP Address from other interface,
such as client’s IP Address.
Default Route
When “Default Router” is enabled, all the packets for
destinations not known by the router's routing table are
sent to the default route. By default, it is enabled.
Add/Modify
These buttons are for you to maintain the channel
configuration settings.
Current ATM VC Table The channel you have configured will be listed here. You
can select the VC channel to Edit or Delete.
Delete Selected
If you want to delete a specific VC channel entry, check
the ‘select’ box of the VC channel you want to delete,
then click ‘Delete Selected’ button.
Enable Auto-PVC
Search
Check the box and ‘Apply’ button to enable auto PVC
search function.
VPI
VPI is a virtual path determines the way an ATM cell
should be routed.
VCI
VCI is the label given to an ATM VC to identify it and
determine its destination.
Add/Delete
These buttons are for you to maintain the Current Auto-
PVC Table.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser: