INSTALLATION MANUAL
DIGIWAY PLUS
9
cdvi.com
cdvigroup.com
EN
This part is addressed to outward door installations
This part is addressed to outward door installations
1)
Identify the dimensions of the motor, locate the fi xing position, the holes for the cables and the 6 fi xing holes making
1)
Identify the dimensions of the motor, locate the fi xing position, the holes for the cables and the 6 fi xing holes making
use of the mounting template provided;
use of the mounting template provided;
2)
Make sure that the bracket of the articulated arm falls in the right position;
2)
Make sure that the bracket of the articulated arm falls in the right position;
3)
Make 6 holes diameter Ø 8 mm and insert the 6 special plugs provided ;
3)
Make 6 holes diameter Ø 8 mm and insert the 6 special plugs provided ;
4)
Fix the plate to the wall using the special screws provided;
4)
Fix the plate to the wall using the special screws provided;
5)
Fix the motor to the mounting plate with the screws M6x14 provided
5)
Fix the motor to the mounting plate with the screws M6x14 provided
6)
Fix the bracket to the door referring to the distance A of the table below;
6)
Fix the bracket to the door referring to the distance A of the table below;
7)
Plug in the articulated arm on the motor shaft and screw the fi xing screw M6;
7)
Plug in the articulated arm on the motor shaft and screw the fi xing screw M6;
8)
If the distance between the motor and the door is higher than that allowed, use the extension (
8)
If the distance between the motor and the door is higher than that allowed, use the extension ( optional
optional );
);
9)
Fix the arm to the motor by using the screw M6x14 or M6x70 provided;
9)
Fix the arm to the motor by using the screw M6x14 or M6x70 provided;
10) Make all the electrical connections;
10) Make all the electrical connections;
11) Apply power;
11) Apply power;
12)
12)
Follow the procedure : «Getting started»;
Follow the procedure : «Getting started»;
13) Connect the Ground wire to the cover terminal and fi x the cover.
13) Connect the Ground wire to the cover terminal and fi x the cover.
L1
L2
L3
A
B
Parameter
Speed
Power
Description
(mm)
(mm)
A
A
410
410
430
430
Door hinge – door bracket distance
Door hinge – door bracket distance
B
B
270
270
360
360
Door hinge – motor axis distance
Door hinge – motor axis distance
A - B
A - B
140
140
70
70
Motor axis – door bracket distance
Motor axis – door bracket distance
C
C
40
40
Bracket holes distance
Bracket holes distance
L1
L1
70,5
70,5
Motor axis – wall distance
Motor axis – wall distance
L2
L2
300
300
Base lever
Base lever
L3
L3
130 - 300
130 - 300
Arm extension
Arm extension
