29
G
ett
in
g
R
ea
d
y
About "Smart Sonic Receiver"
The product is equipped with "Smart Sonic Receiver" which transmits
sound by vibrating the display. Although there is not earpiece hole,
you can use as usual.
■
Touching to your ear
Touch earpiece part of the product to your ear as shown below. By
covering your ear to interrupt surrounding noise, voice sound will
be heard more easily. Move position of the product up/down/left/
right to adjust according to your hearing condition or an immediate
environment.
Earpiece
Microphone
◎
Take care not to cover the microphone with your cheek or fingers during a
call.
◎
When the earphones (sold separately) are connected, voice sound can be
switched to the one via earphones not using the smart sonic receiver.
◎
Do not put stickers, etc. on the display. May make earpiece sound to be
heard hard.
◎
There may be differences in the hearing easiness among individuals.
◎
Depending on environment, the hearing effect differs.
Attaching a strap
1
Remove the battery cover of the back side of the
product
For removing the battery pack cover, see "Attaching the battery pack"
(
▶
P. 30).
2
Pass the strap into the strap eyelet
3
Hook the strap on the strap pin, then pull it outward
Strap pin
Strap eyelet
4
Attach the battery pack cover
◎
Make sure that the strap holds on the strap pin. If the strap is caught
between the phone and battery pack cover, the battery pack cover cannot
be closed completely and its waterproof/dustproof performance may be
lost. Also the strap comes off, which may cause damage or injury.