Battery Charging
The battery can be charged while still in the frame, or can be removed for charging.
The charge port is located under the battery handle. With the charger unplugged
from the mains outlet, lift the handle and plug the charger into the battery checking
the orientation of the plug as you insert it. Once the plug is securely in place plug the
charger into the mains outlet and turn it on. The light should show red while
charging and green once charged. See the charger instruction for more detail. See
below for removing the battery.
Battery Removal
To remove the battery, unplug the battery cable, turn the key to the off position,
push it in, and turn it all the way anti-clockwise. The battery can now be slid towards
the back of the bike and removed. Refitting the battery is the reverse of removing it,
however make sure that the lock mechanism lines up with hole in the battery plate
as this is what secures the battery to the bike.
TAKING CARE OF YOUR BATTERIES
Charge the battery at least every 90 days for li-ion batteries
Charge your battery pack after every time you use your bike / scooter
Always store bicycles / scooters with a fully charged battery
Disconnect the charger from the wall outlet and bicycle when charging is
complete
Make sure the battery is fully charged (as indicated by status on charger)
Do not store batteries below 10°c and never allow batteries to freeze (below
0°c)
Bikes are equipped with a 5 minute sleep mode. If no activity is detected
after a short period the bike will turn off to conserve power
FREQUENT “STOPS AND STARTS” WILL DRAIN A BATTERY MORE QUICKLY
THAN CONTINUOUS RIDING leading to a reduction in range
