Installation Guide
（ AP1709B/AP1709C/AP1720
（New item）
/AP1714/AP1612B/AP1807/AP1804/AP1506/AP1013 ）
Trimless Recessed
2. Install the front-end cap and PC cover.
3. Slot the place where the profile need to be
installed. The length of the groove is determined by
the actual length of the product. The recommended
width and depth are shown in the attached table
below. Also reserve a DC power cord
5. Connect the profile cable to the reserved DC
power cable, pay attention to the positive and
negative poles. Put the profile into the slot and press
it.
4. Apply glass glue to the bottom of the tank.
6. After the glue is cured, the profile is firmly adhered.
The installation is completed.
1. Attach strip light at the center of the inner
bottom of aluminum profile.
Model
no.
AP1709B
AP1709C
AP1720
AP1714
AP1612B
AP1807
AP1804
AP1506
AP1013
Width
（mm）
18
18
18
18
17
19
19
16
11
Depth
（mm）
10.5
10
14.5
14.5
12
7
4
6
13
