2003 Sarena Bay
™
Export Owner’s Manual
Push the
Light / Enter Button
to control your Dynamic LED lighting. This
includes both the Fountain and the Spa lights, which are synchronized to operate
together. The lights have three basic Color Effects you can choose. Simply press
the
Light / Enter Button
until you find the one you want. The Color Effects
are:
•
Color Fade Slow
: This sequence rotates through all colors
approximately once per minute.
(Start up default)
•
Color Fade Fast
: This sequence rotates through all colors
approximately three times per minute.
•
Color Hold
: Hold on any of the colors.
The default Color Effect is
Color Fade Slow
. Use the
Light / Enter Button
to change Color Effects as follows:
•
Start on
Color Fade Slow
(default)
•
Turn off for 1 second, back on again for
Color Hold
•
Turn off for 1 second, back on again for
Color Fade Fast
•
Turn off for 1 second, back on again for
Color Hold
•
Turn off for 1 second, back on repeats to
Color Fade Slow
•
Turn off for 5 or longer: start on
Color Fade Slow
Note
For your convenience and cost savings, the lights will
automatically turn off after one hour. To reactivate the lights after
they have been shut off by the timer, simply press the
Light /
Enter Button
again. The lights will always start in the
Color
Fade Slow
sequence after they have been off for more than 5
seconds to ensure they always remain synchronized.
Light / Enter Button
The
Light / Enter Button
is also used to exit programming sequence whenever
you have entered the programming mode by first pressing the
Program
Button
.
PROGRAM Button
The
PROGRAM Button
is used to initiate the time setting, filter programming,
and other programming features.
For more information, see the section on “
Programming the Scrolling Message
Center
.”
24
