2003 Sarena Bay
™
Export Owner’s Manual
Temperature Unit Selection
After setting the pump run time, the top line of the Digital Display Window will read “
SET
TEMPERATURE UNITS
”. Push the
UP
or
DOWN Buttons
to toggle from
°
F
to
°
C
. When your
desired temperature unit appears in the Digital Display Window, push the
PROGRAM Button
to select it.
The pre-set factory default is Celcius
.
Vision Cartridge
After setting the temperature units, the top line of the Digital Display Window will read “
SET VISION
CARTRIDGE
”. Push the
UP or DOWN Buttons
to toggle between “
Yes
” and “
No
”. If you are currently
using a Vision Cartridge select Yes, if not, select No. Selecting “Yes” will prompt the control to notify you
when your cartridge needs replacement. When your desired selection appears in the Digital Display Window,
push the
PROGRAM Button
to select it.
The pre-set factory default is “No.”
Waterfall Run Time
After choosing the Vision Cartridge setting, the top line of the Digital Display Window will read “
SET
WATERFALL RUN TIME
”. Push the
UP
or
DOWN Buttons
to toggle between
1
, 2, 3, or 4 hours. For
example, if you choose 2 hours, when you push the
Water Feature Button
, the Waterfall will run for 2
hours before shutting down automatically.
The pre-set factory default is “1.”
Digital Display Window Invert
The invert feature will flip the text on the Digital Display Window play so it can be easily read from both
inside and outside the hot tub. To invert the text, simply push the
ENTER Button
three times. To return
the text to its original position, repeat this process - push the
ENTER Button
three times.
Control Panel Lock
To help prevent unauthorized use of the hot tub, the control panel may be locked. When the control panel
lock is engaged, all programmed or default hot tub functions will operate normally but all control buttons will
not operate. When the panel is locked, the Digital Display Window will display this message: “
ALL SPA
FUNCTIONS LOCKED
.”
To lock the panel all the following Buttons must be pushed within
3 seconds:
1. Push the Dimension One Spas ICON (logo)
®
Button.
2. Push the Dimension One Spas ICON (logo)
®
Button.
3. Push the ENTER Button.
Control Panel Unlock
To unlock the panel: All the following buttons must be pushed within 3 seconds:
1. Push the ENTER Button.
2. Push the ENTER Button.
3. Push the Dimension One Spas ICON (logo)
®
Button.
When the last Button is pushed all buttons will be active.
30
