Page 28
BAY Collection
11.13 Selecting the Desired Massage Action
Your D1 hot tub is equipped to allow you to customize the
massage action you desire. Each model incorporates massage
selector(s) that allows you to customize the massage and
performance by diverting water between various jet systems.
Simply turn the massage selector to divert water pressure to various jet
groups.
Note:
It is considered normal for sound levels within the valve to vary
between positions due to the large amounts of water flowing through
it. For optimum filtration benefits, leave the valve in the center position
when the hot tub is covered.
11.14 Status Light
The indicator light located on the front cabinet panel of the hot tub is
an early detection system that will notify you when the hot tub needs
immediate attention. The light logic is as follows:
• Solid Blue light: Hot tub functioning normal. (UltraPure™ is running,
all operations are normal.
• Flashing Blue light: Maintenance reminder
• Solid Red light: Hot tub error (indicates that immediate attention is
required to clear or fix an error code.)
11.15 Dynamic Massage Sequencer™
The Dynamic Massage Sequencers control the jets in the lounge areas
to sequentially massage different muscle groups, Figure 11.15a. When
selecting a massage sequence, the human figure on the control panel
displays corresponding lights, allowing a preview of that sequence before
starting it.
= Light Button:
Turns the hot tub lights on and off.
=
Jets button:
Turns the jet pump associated with the
Sequencer on or off.
= Speed button:
Changes the amount of time between each
step of the massage sequence. The default time is 5 seconds
intervals. The speed light will blink quickly.
• Press the speed button again to change it to 15 seconds
intervals. The speed light will blink slowly.
• Press again to change it to 30 seconds intervals. The
speed light will blink very slow.
1
2
3
4
5
6
Lig
ht
Jet
s
Sp
eed
Se
qu
enc
e
Sta
rt/S
top
Figure 11.15a
