2004 Bay Collection
Owner’s Manual
Heat Status Light
The Heat Status Light will turn on when there is a call for heat and the heater
engages. This is a normal function. The right side of the Digital Display Window
will continue to read the current temperature while the bottom left corner will
scroll the message “HEATING TO _ _ _
°
F” until the hot tub reaches the set
temperature. An animated thermometer will also be displayed in the upper
center of the Digital Display Window to confirm heater activity.
If the water reaches 2
°
F (
≅
1
°
C) above the set temperature, the message
“COOLING TO _ _ _ - CIRC PUMP & O3 OFF” will be displayed in the
bottom left hand side of the Digital Display Window and a cooling cycle will
start.
Dimension One Spas
ICON (Logo)
®
The time of day can be viewed by pushing the Dimension One Spas ICON
®
-
logo on the far right of the control panel. If no other button is pushed within 5
seconds, the display will revert to the hot tub water temperature reading. The
pre-set factory default is Fahrenheit.
Pressing the logo for 5 seconds will place the spa in the “Standby” mode and
allow the spa to be cleaned without turning off the power.
Infrared Sensor
The Top Side Control also offers a “built-in” infrared sensor. This infrared
sensor allows the use of your optional D1 Remote Control to control the spa
jets, fountain, interior lights, and iWatch perimeter lighting.
To use it, simply point the D1 Remote Control at the infrared sensor and press
the appropriate button on the remote control. The infrared sensor is the located
between the Water Feature and Up buttons.
28
Summary of Contents for Bay Collection
Page 1: ......
Page 17: ...2004 Bay Collection Owner s Manual Lotus Bay Innovative Seating For 7 11...
Page 22: ...2004 Bay Collection Owner s Manual Additional Design Features Sarena Bay 16...
Page 23: ...2004 Bay Collection Owner s Manual Additional Design Features Lotus Bay 17...