DIMOEL KIT BATT12V, Manual

22

IMPORTANT REMARKS

DIMOEL S.L. has the right to modify the product without
previous notice; it also declines any responsibility to
damage or injury to people or things caused by 
improper use or wrong installation.

Please read this instruction manual very carefully

before installing and programming your control unit.

•

This instruction manual is only for qualified 
technicians, who specialize in installations and 
automations.

•

The contents of this instruction manual do not 
concern the end user.

•

Ever y programming and/or ever y maintenance 
ser vice should be done only by qualified technicians.

AUTOMATION MUST BE IMPLEMENTED IN COMPLIAN-
CE WITH THE EUROPEAN REGULATIONS IN FORCE:

EN 60204–1

(Machiner y safety. electrical equipment of 
machines, par t 1: general rules) 

EN 12445

(Safe use of automated locking devices, 
test methods)

EN 12453

(Safe use of automated locking devices, 
requirements)

•

The installer must provide for a device 
(es. magnetotermical switch) ensuring the omnipolar 
sectioning of the equipment from the power supply.
The standards require a separation of the contacts 
of at least 3 mm in each pole (EN 60335-1).

•

The plastic case has an IP55 insulation; to connect 
flexible or rigid pipes, use pipefittings having the 
same insulation level. 

•

Installation requires mechanical and electrical skills, 
therefore it shall be carried out by qualified 
personnel only, who can issue the Compliance 
Cer tificate concerning the whole installation 
(Machine Directive 98/37/EEC, Annex IIA).

•

The automated vehicular gates shall comply with the 
following rules: EN 12453, EN 12445, EN 12978 
as well as any local rule in force. 

•

Also the automation upstream electric system shall 
comply with the laws and rules in force and be 
carried out workmanlike.

•

The door thrust force adjustment shall be measured 
by means of a proper tool and adjusted according to 
the max. limits, which EN 12453 allows.

•

We recommend to make use of an emergency 
button, to be installed by the automation (connected 
to the control unit STOP input) so that the gate may 
be immediately stopped in case of danger.

CONFORMITY TO REGULATIONS

DIMOEL S.L. declares that the components included in
the kit are in conformity with the provisions of the 
following EC directives:
73/23/EEC

electrical safety

93/68/EEC

electromagnetic compatibility

99/05/EEC

radio directive

98/37/EEC

machine directive

and with the standards referenced here below:

Note: Declares that the above mentioned devices may
not be operated until the machine (automated gate) is
identified, CE-labeled, and declared to be compliant to
the specifications of Directive 89/392/EEC and follo-
wing modifications.

The person in charge for the machine star t-up must pro-
vide the following records:
•

Technical specification paper

•

Declaration of conformity

•

CE-labeling

•

Testing record

•

Maintenance record

•

Operation manual and directions

COLLADO VILLALBA (Madrid)   01/03/2004

DIMOEL S.L. legal representative

Aldo FERNANDEZ SANCHEZ

73/23/EEC

93/68/EEC

99/05/EEC

SLIM12V

/

EN 55014-1
EN 55014-2

/

PRG12PP

EN 60335–1

EN 50081–1,

EN 50081–2

/

TSC-4

EN 60335–1

EN 301489-3

EN 300220-3