Dimplex 5059340241678, Manual

13

EF830

In

 more 

detail

 . . .

Viewing the timer setting

1.  Press the   key.

2.  Press the “+” or “-” key to check the power-on time of the set timers one by one.

3. 

To check the power-off time, press the “▲” key.

4.  Press the “+” or “-” key to check the power-off time of the set timers one by one.

5.  To delete selected setting, press the “

C

” key.

Activation timer

Press the   key to activate the timer function.

NOTE:

 When the timer is active, the heating level must be manually selected. 

If the heater function is not selected, only the flame effect goes on at the set 

power-on time.

Automatic heating mode

Press the “

IC

” key to activate automatic heating mode. The “

AUTO

” icon appears on 

the display. And this function has two effects:

1.  Adaptive start

After the automatic heating mode is turned on, if the weekly timer is turned on and 

in the standby mode, within 20 minutes before the scheduled start-up time, the 

heater will make three corresponding heating methods according to the current room 

temperature.

1)  The room temperature is lower than the set temperature by around ≥10°C, the high 

heating power will be turned on.

2)  The room temperature is lower than the set temperature by around ≥5°C but 

<10°C, the lower heating power will be turned on.

3)  If the room temperature is less than around 5°C below the set temperature, the 

heating will not be turned on.

2.  Automatic heating

After turning on automatic heating mode, if the heater does not turn on the weekly timer; 

or the weekly timer is turned on, and it is in the default heating period, the heater will also 

make three corresponding heating methods according to the current room temperature:

1)  The room temperature is lower than the set temperature by around ≥6°C, high 

heating power will be turned on.

2)  The room temperature is lower than the set temperature by around <6°C, lower 

heating power will be turned on.

3)  When the room temperature reaches or exceeds the set temperature, the heater 

will stop heating.

NOTE:

 The working temperature in the automatic heating mode will be a little 

different according to the different ambient room temperature.

Product function

5059340241678-EF830_A5_IM_GB-V03.indd   13

5059340241678-EF830_A5_IM_GB-V03.indd   13

13-05-2021   13:17:29

13-05-2021   13:17:29