KDS6401E
REMOTE CONTROL USAGE
This stove is supplied with a radio frequency remote control. This remote control has a range of
approximately 50 feet (15.25m); it does not have to be pointed at the fireplace and can pass
through most obstacles (including walls). It is supplied with one of 243 independent frequencies
to prevent interference with other units. The frequency code is indicated on the back of the
transmitter.
Note: Ensure that the fireplace 3 position switch is
set to the remote control setting.
To operate, push the ON button to turn fireplace on,
push the OFF button to turn the fireplace off.
BATTERY REPLACEMENT
To replace the battery, slide battery cover open on the
hand held transmitter. Correctly install one 12 volt (A23)
battery in the battery holder. Close the batter cover.
Remote Control Initialization
This procedure is required every time there is a loss of
power to the remote control in the fireplace. (I.e. power
failure, breaker tripped, main power switch is turned off)
1. Ensure that power is supplied through main
service panel.
2. Locate manual controls.
3. Toggle the main power switch, to the“
=
” position.
4. Press ON button located on the remote control
transmitter. This will synchronize the remote
control transmitter and receiver.
3
