5
SAVE THESE INSTRUCTIONS
⑮
To disconnect the unit, turn the
controls off, then remove the plug
from the outlet.
⑯
Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire, or
damage to the heater.
⑰
To prevent a possible fire, do
not block air intake or exhaust
in any manner. Do not use on
soft surfaces, like a bed, where
openings may become blocked.
⑱
All electrical heaters have
hot and arcing or sparking parts
inside. Do not use in areas where
gasoline, paint, or flammable
liquids are used or stored or
where the unit will be exposed to
flammable vapors.
⑲
Do not modify the fireplace. use
it only as described in this manual.
Any other use not recommended
by the manufacturer may cause
fire, electric shock or injury to
persons.
⑳
Avoid the use of an extension
cord. Extension cords may
overheat and
cause a risk of fire.
If you must use an extension cord,
the cord shall be no. 14 AWG
minimum size and rated not less
then 1875 Watts.
㉑
Do not burn wood or other
materials in the fireplace.
㉒
Do not strike the fireplace glass.
㉓
Always use a certified
electrician should new circuits or
outlets be required.
㉔
Always use properly grounded,
fused and polarized outlets.
㉕
Disconnect all power supply
before performing any cleaning,
maintenance or relocation of the
unit.
㉖
When transporting or storing the
unit and cord, keep in a dry place,
free from excessive vibration and
store so as to avoid damage.
IMPORTANT INSTRUCTIONS
CAUTION
rIsK oF ELECTrIC sHoCK
Do noT oPEn
no usEr-sErVICEABLE PArTs InsIDE
